Important information about purchasing from the US.

If you see a price that looks too good to be true, it probably is! Beware of counterfeit goods. Check our website to make sure you’re purchasing from an authorized RØDE reseller. For quick reference NO FBA reseller (FULFILLMENT BY AMAZON) on Amazon is authorized. You can view a current list of unauthorized US dealers here.

VideoMic NTG


当社のVideoMic NTGビデオのプレイリストをご覧下さい
当社のVideoMic NTGビデオのプレイリストをご覧下さい
VideoMic NTG フォト

This Changes Everything | VideoMic NTG

VideoMic NTG - Firmware Update

Features and Specifications of the VideoMic NTG On-Camera Shotgun Microphones

Introducing the RØDE VideoMic NTG

Find an authorised RØDE dealer

United states


または当社が推奨する以下のオンライン販売店からVideoMic NTGをお求めください。 United states


29 以下を取り扱うオンライン VideoMic NTG

  • 比類のない音響透過性と自然でバランスの良いサウンドを実現する革新的な音響設計
  • 超単一指向性スーパーカーディオイドポーラパターンとフラットな周波数特性
  • 比類ないダイヤル式の可変ゲインコントロール
  • カメラとモバイルデバイスの両方とシームレスに相互作用する 3.5 mm 出力自動切り替え機能
  • シームレスなオーディオモニタリング用のヘッドフォン出力によるクラスコンプライアント USB 出力
  • デジタル スイッチでハイパスフィルター、パッド、ハイブースト、セーフティチャンネルをコントロール
  • dB ピーク警告表示
  • 内蔵の充電式リチウムイオンバッテリーによる 30 時間以上の撮影と、 USB-C 経由での充電が可能
  • ケーブルマネジメント付きの高品質 Rycote® Lyre® ショックマウントおよびカメラのコールドシューでマイク配置を調整するスライドレール
  • 軽量 (94g) で頑丈な航空宇宙グレードのアルミニウム構造

VideoMic NTG は、オンカメラマイクに最適な機能が満載のブロードキャストクオリティのショットガンマイクです。NTG5 ブロードキャストショットガンマイクと同じ革新的な音響設計が特徴で、比類ないクリアで自然なバランスの良いサウンドを実現します。極めてフラットな周波数特性、超単指向性のスーパーカーディオイドポーラパターン、非常に低い自己雑音レベルなどを特徴とした、世界最高のショットガンマイクと肩を並べられるコンパクトなオンカメラマイクです。

卓越したサウンドだけでなく、さまざまなツールや機能を備えた VideoMic NTG は非常に汎用性が高く、あらゆる撮影状況に対応します。デジタルスイッチでハイパスフィルターや -20 dB パッド、ハイブーストやセーフティーチャンネルを操作できます。さらに、必要に応じて出力を正確に調整できる独自のダイヤル式可変ゲインコントロールも備えています。また3.5 mm 出力自動検出機能で、接続されているデバイス (カメラまたはモバイル) と対応するスイッチを検出します。もうアダプターケーブルを用意する必要はありません。新しい便利な dB ピーク警告ランプも付いているので、オーディオにクリッピングが生じていないことを常に確認できます。

VideoMic NTG は単なるオンカメラマイクではありません。VideoMic NTG は、オンカメラマイクやブームマイクとして、またはピストルグリップに取り付けてDSLR やコンパクトカメラ、スマートフォンと完全にペアリングできるだけでなく、コンピューター、タブレットまたはスマートフォンに接続してフル機能のUSBマイクとしても使用できます。さらに、3.5 mm 出力端子はヘッドフォン出力も兼ねているため、USB 出力を使用しながらオーディオを遅延なくモニタリングできます。

VideoMic NTG 仕様
VideoMic NTG 仕様
Acoustic Principle

Pressure gradient electret condenser

Polar Pattern


Frequency Range

20Hz – 20kHz

Frequency Response

35Hz – 18kHz ±3 dB

Output Impedance


Signal to noise Ratio

79 dBA

Dynamic Range

105dB SPL (A-weighted, as per IEC651)

Equivalent Noise

15dB SPL (A-weighted, as per IEC651)


-26 dB re 1V/Pa (50mV @ 94dB SPL) ± 1dB @ 1kHz

Input SPL @ 1% THD

120dB SPL

High Pass Filter Frequency

75Hz, 150Hz

Battery Life

30+ hours

Battery Capacity


Output Connection

3.5mm auto-sensing USB-C

Bit Depth


Sample Rates


OS Requirements

Mac OS 10.12

Windows 10

Weight (g)



Diameter: 21.6mm

Length: 171mm

当社のVideoMic NTGビデオのプレイリストをご覧下さい
当社のVideoMic NTGビデオのプレイリストをご覧下さい
VideoMic NTG サポート
  • What is the VideoMic NTG’s auto-power feature?+
    • The auto-power feature was first introduced to the VideoMic range with the VideoMic Pro+. It is a handy function that automatically turns the microphone off when it detects that the camera is switched off, helping conserve battery life, and turns it on when the camera is turned on, so that you never have to worry about missing a take. The auto-power function only works if your camera delivers plug-in power (most do), as this is what tells the microphone if it is on or off, or if you are using the microphone in USB audio mode. The VideoMic NTG also features a power button, so that it can be manually powered on and off. Check out our list of cameras that deliver plug-in power here.

  • What does the auto-sensing feature do?+
    • The auto-sensing output is an intelligent feature that seamlessly detects whether your microphone is plugged into a TRS input, like those on most cameras, or a TRRS input, which most smartphones and tablets have, and switches the output to accommodate. This means you don’t have to worry about using TRS to TRRS adaptor cables – the SC10 cable that accompanies the VideoMic NTG will work seamlessly with any device. However, if your device has a Lightning®  connector or anything other than a 3.5mm input, you will need to use an adaptor.

  • What does the infinitely variable gain control do?+
    • The infinitely variable gain control is a knob on the rear of the microphone that allows you to precisely tailor the output level to your recording device. This is an active control that has a greater output range than any other microphone on the market – it can deliver anything from mic level signal all the way to a headphone level output, which is particularly useful when using the 3.5mm jack as a headphone output. Where other microphones simply employ a pad to adjust the output, the VideoMic NTG’s control also actively amplifies the signal at various gain stages, resulting in a cleaner audio with a vastly improved signal-to-noise ratio (it essentially does all the hard work so your camera’s lower-quality internal preamp doesn’t have to, lowering the noise floor of your signal).

  • How long does it take for the battery to fully recharge?+
    • 2 hours from empty to full.

  • How should I set the output level of the VideoMic NTG?+
    • When connected to a camera or smartphone, we recommend you turn down the gain of your camera to, or close to, its lowest setting, and turn off any automatic gain controls that may be activated. Then, starting from the lowest setting, turn up the infinitely variable gain control on the VideoMic NTG until your meters are showing a good level (usually just starting to touch the yellow, or about halfway) when recording your expected sound source. Where possible, monitor your audio using headphones, to ensure your sound is clean and clear.

  • What are the physical controls and lights on the VideoMic NTG and how do they work?+
    • There are three physical controls on the VideoMic-NTG:

      • The first is the infinitely variable gain control on the rear of the mic, which delivers a wide output range (numbered 1–15). You can use this to precisely tailor the output level to best match for your device.
      • The next button is the power/function control. By default, the mic will auto-power on when connected to a device and power off when disconnected from a device, but you can also turn the mic on/off manually by holding this button for three seconds. A single press on this button will engage the -20dB pad (left LED illuminates), another press will engage the safety channel (left LED off, middle LED illuminates), and third press will engage both functions (left and middle LEDs illuminate). A final press will disengage both functions. The right LED is the dB peak warning light, which will illuminate red when the mic’s internal preamp is clipping, at which point the pad should be engaged.
      • The final button is the filter control. Pressing this once will engage the 75Hz high-pass filter (left Led illuminates). Pressing it again will select the 150Hz filter (middle LED illuminates). A third press will disengage the high-pass filters (left and middle LEDs off). A long press (3 seconds) will engage the high frequency boost (right LED illuminates). This can be used in conjunction with the high-pass filters. Another long press will disengage the high boost.
      • There is also battery power status indicator. Green indicates the battery is fully charged, amber indicates medium charge, red indicates low charge, and blinking red indicates very low charge.
      • This LED also indicates charging status when the mic is connected to a power source. When connected to a computer, green indicates it is fully charged; blue indicates it is charging. When connected to a power bank or USB power adapter, the LED maintains the red/amber/green behaviour above. If the power LED triple blinks red, this means that mic has detected it is outside its operating temperature range. 
  • What is the VideoMic NTG’s noise floor?+
    • The VideoMic NTG has extremely low self-noise for a microphone of this type (15dBA). All the RØDE VideoMics have extremely low self-noise; in fact, the VideoMic Pro and VideoMic Pro+ are actually slightly quieter than the VideoMic NTG. It’s worth comparing the VideoMic NTG to other on-camera microphones for reference as to how quiet all RØDE microphones are.

  • With other VideoMics, it is recommend that I lower the gain on my camera as much as possible and use the gain controls on the mic to boost the signal. Is this still the recommended setting on the VideoMic NTG?+
    • Yes, this is the same for the VideoMic NTG. We’ve designed the output level to be similar to the VideoMic Pro+ when the gain knob is set to 10. This is the best place to start with any device, and adjust the level up or down from there. With any VideoMic, the best results are generally achieved when the camera preamp is being driven as little as possible.

  • Does the VideoMic NTG have a standby mode?+
    • There isn’t a standby mode on the VideoMic NTG, it’s either off and not drawing any power, or it’s completely on. When the microphone is off it will last months without the need to charge.

  • When the safety channel is engaged on the VideoMic NTG, is any difference between the two channels?+
    • There is no difference in the sonic characteristics of the safety channel, it is just 20dB lower than the main channel. However, when you boost the safety channel in post-production, you may notice some preamp noise from your camera, which may affect the perceived audio quality. The safety channel should ideally be used to replace the small piece of audio that has clipped, and it’s best to blend the audio in and out quickly to reduce any noticeable quality change.

  • The VideoMic NTG has great radio interference (RF) rejection. How is this achieved?+
    • All RØDE microphones are tested extensively for interference from a wide range of devices. We make sure that the bodies are extremely well shielded and that the electronics aren’t susceptible to interference. Our state of the art RF test facilities allow us to put microphones through a wide range of RF simulations, which ensures our designs are robust and highly resistant to RF interference.

  • Is the VideoMic NTG's battery user-replaceable?+
    • The internal battery is not user-replaceable, however, the VideoMic NTG has a 10-year warranty once it has been registered. If there are any issues with the battery within this time frame, simply contact the RØDE support team and we'll happily help out. 

  • How do I use my VideoMic NTG with an iOS device with a Lightning connector, like an iPhone, iPad or iPod?+
    • To connect your VideoMic NTG to a Lightning-equipped iOS devices, such as an iPhone, iPad or iPod, you need to use the RØDE SC15 cable. Use this to connect the USB-C output of the microphone to the input of your device (please ensure you've updated your VideoMic NTG to the latest firmware to allow for this connection – you can download this here). You can also plug your VideoMic NTG into an iOS device using the 3.5mm output, however, using the USB-C output with the SC15 gives you access to a host of features including headphone monitoring, the safety channel, and two-way audio transmission for making video calls. We highly recommend this option.

  • Does the safety channel work with smartphones?+
    • The VideoMic NTG's safety channel should work if the VideoMic NTG is connected using the USB-C output of the microphone to the digital input of your device. Please note, this compatibility depends on your smartphone manufacturer. However, it does not function with devices with a TRRS input as they only support one channel of audio.

  • Will the VideoMic NTG work with my computer or tablet PC?+
    • The VideoMic NTG is a class-compliant device and will work directly with your computer or tablet PC. As a class-compliant USB device, you don’t need drivers or software for it to work. Simply plug it into your device, set it as your input source in your system preferences or recording software settings, and hit record.

  • Will the VideoMic NTG work with my Android smartphone?+
    • The VideoMic NTG is compatible with most Android smartphones that have USB-C. Compatibility depends on your smartphone manufacturer.


VideoMic NTGについて質問やサポートの依頼をする場合は、当社の問い合わせ先をご覧になって直接お問い合わせになるか、ここからお住まいの地域の取扱店を捜してください。