Important information about purchasing from Amazon in the US.

RØDE Microphones does not authorize Fulfilled By Amazon. We have purchased counterfeit RØDE products using Fulfilled by Amazon and highly recommend that you only purchase RØDE products from authorised dealers.

If you purchase any RØDE microphone from an unauthorized dealer via Fulfilled By Amazon you will not receive any US warranty or technical support.

You can view a full list of authorized US dealers here.

RØDELink Performer Kit
ボーカル パフォーマンス・プレゼンテーション用デジタル ワイヤレス オーディオ システム
当社のRØDELink Performer Kitビデオのプレイリストをご覧下さい
当社のRØDELink Performer Kitビデオのプレイリストをご覧下さい
RØDELink Performer Kit フォト

Introducing the RØDELink Performer Kit

The RØDELink Performer Kit consists of the new TX-M2 Transmitter, a Wireless Handheld Condenser Microphone based on the RØDE M2 Live Condenser Microphone, and new RX-DESK Desktop Receiver.

または当社が推奨する以下のオンライン販売店からRØDELink Performer Kitをお求めください。 United states

所在地を変更する

4 以下を取り扱うオンライン RØDELink Performer Kit

  • セット内容: TX-M2 (高品質コンデンサー マイク)、RX-DESK (デスクトップ レシーバー)、LB-1 リチウムイオン充電池
  • Series II 2.4 GHz デジタル伝送
  • 128-bit の暗号化
  • 最大 8 台のキットを同時使用可能
  • 低ハンドリング ノイズ
  • 最大距離 100m*
  • 同梱の LB-1 充電池、または単 3 電池 2 本による給電
  • ミュート スイッチ
  • オーストラリアで設計および製造

高品質のハンドヘルド コンデンサー マイク (TX-M2) とデスクトップ レシーバーをセットにした RØDELink Performer Kit は講義、質疑応答、発表会、結婚式、ライブ パフォーマンスなどに最適です。RØDELink レシーバーとワンタッチでペアリングできる本マイクは同梱されている RØDE の新型 LB-1 リチウムイオン充電池または単 3 電池 2 本で動作します。

RØDELink シリーズは直感的に使用できるため、箱から取り出してすぐに使用でき、チャンネルを選択する必要もありません。暗号化された Series II 2.4GHz デジタル信号を 2 ch 同時に送信し、自動的に強度の強い信号を選択するため、有線接続と同等の信頼性が実現します。

Performer Kit には TX-M2、RX-DESK、LB-1 リチウムイオン充電池、マイク クリップ、マイク ケース、Micro USB ケーブル、2 年の延長保証が含まれています*。

お近くの RØDE 製品取り扱い店はこちらでご覧ください。

* LB-1 は延長保証に含まれていません.

RØDELink Performer Kit 仕様
RØDELink Performer Kit 仕様
Transmission type2.4 Ghz Fixed Frequency Agile System
System dynamic range118dB
Range (distance)Up To 100m*
Frequency range35Hz - 20kHz
Maximum output level+18dBu
Max input signal level140dB SPL
Max latency4ms
Receiver (RX - DESK)
Power sourceDC Power Pack 15v 1A Or DC Power Pack
AntennaExternal Diversity Antenna
Output connectionBalanced XLR / Unbalanced 1/4" Jack
Dimensions208mm(W) X 37mm(H) X 166mm(D)
Weight792gm
Transmitter (TX - M2)
Power sourceBatteries Or USB
AntennaDiversity Antenna Located At The Bottom Of The TX - M2
Input connectionN/A
Dimensions40mm(W) X 256mm(H) X 40mm(D)
Weight222gm
当社のRØDELink Performer Kitビデオのプレイリストをご覧下さい
当社のRØDELink Performer Kitビデオのプレイリストをご覧下さい
RØDELink Performer Kit サポート
FAQ
  • What is the operating range of the RØDELink wireless system?+
    • The RØDELink system has an operating range up to 100m (~110 yards), however as with all wireless transmission devices this operating range can be influenced by external factors.

      The RØDELink system operates in the 2.4GHz frequency spectrum which is shared with common wireless transmission devices such as WiFi networks, Bluetooth devices, microwave ovens and more. The more 2.4GHz devices that are simultaneously running in the same location as your RØDELink system, the more congested this 2.4GHz frequency spectrum will be, cutting down the signal strength and overall operating range for all 2.4GHz devices. In a very busy 2.4GHz environment you may find your RØDELink system is unable to maintain its maximum operating range.

      Signal travelling distance is also another possible factor. This refers to the physical distance between the Receiver (RX) and Transmitter (TX). An unobstructed line of sight between the two devices will provide the shortest possible signal travelling distance, therefore the strongest signal. If the signal needs to travel through, or around walls and other objects, this lengthens your signal travelling distance, reducing overall signal strength.

      For more information on the 2.4GHz spectrum with your RØDELink system watch the video below.

  • Can I use multiple RØDELink kits at the same time?+
    • Yes, RØDELink systems have been tested for use with up to 8 kits operating in the same area under optimum conditions without problem.
      It is important to note that the more kits you have operating simultaneously, the more likely you are to experience a decrease in their useable range. This is also relative to the environment you are operating in and depending on the amount of 2.4Ghz devices that are active at the time of use, your useable range may be less than the optimum distance.

      If a complex setup is required or you want to use multiple RØDELink systems, we strongly recommend testing your setup in the same active environment you intend to use it. This will allow you to assess the signal strength surrounding you and any range restrictions you’ll need to be aware of during operation.

      When using multiple RØDELink kits you will also want to space the receivers apart for optimal performance. This only needs to be a minimum of 10-15cm and typically will only affect usage in congested RF environments as well as when larger transmitting distances are required. Always make sure that your receivers (Rx) are orientated so that the antennas are forward facing (when using the Rx-CAM this will occur naturally if the kits are mounted via the provided cold shoe mount and the display is facing the camera operator).

  • How does ‘Signal to Noise Ratio’ affect my RØDELink’s range?+
    • Take for example a small room with no people in it, you are trying to hold a conversation with someone across the room, you’ll probably need to be standing within 4-5 meters of that person for them to be able to hear you speaking at a normal level. Now, consider being in the same room but instead filled with 20 people talking at once, you’ll need to be much closer than a meter for that same person you were trying to hold a conversation with to hear you speaking at normal level, reducing the distance between you.  

      Think of yourself as the transmitter, your friend the receiver, your speaking voice the signal and all the other people speaking around you to be the ‘noise’. The greater the ‘noise’ level (other signals in the 2.4Ghz spectrum), the closer the ‘transmitter’ and ‘receiver’ will need to be to successfully communicate with each other.

      Of course, there is technology that can help with the background noise. Each RØDELink system transmits on two frequencies simultaneously and its series II 2.4Ghz technology is constantly searching for and hopping between the strongest frequencies to transmit on, ensuring the best possible communication between transmitter and receiver. However, understanding that the 2.4Ghz ‘noise’ will affect the range which the RØDELink systems can transmit will help ensure you allow for the best setup within your requirements.

  • How do I optimize my RØDELink’s range and performance?+
    • Understanding both the environment you are operating in as well as exactly what the oppositional factors mean and how they might affect performance is key to optimising your RØDELink setup.

      1. The biggest impact on performance will of course be interference from other devices in the area you intend to use your RØDELink system. Wi-Fi access points are the most common interferer in the 2.4Ghz spectrum, so a simple way of identifying how many access points are available in an area is to take a quick look at how many you can see on your smartphone. The more access points, the higher the interference potential.
      2. If you have identified that you are operating in a congested 2.4Ghz environment, you’ll then want to consider how these interferers will impact the RØDELink’s performance.  As a general rule, 3 access points, being heavily used in the same area will cause the 2.4GHz frequency band to be used up and you will see a large reduction in range performance of the RØDELink system.  However, distance between the interferers and the RØDELink system can help this. For optimum RØDELink performance you should aim to keep the distance between your transmitter (Tx) and receiver (Rx) to less than the distance between any interfering device and the transmitter or receiver.
      3. Wherever possible, you will want to keep your Transmitter (Tx) and Receiver (Rx) in direct line of sight. This means that there are no objects at all between the two. Understandably the transmitter (Tx) may at times need to be hidden depending on the scenario you are using it in, however the RØDELink’s range can be further optimised by ensuring there is nothing impeding the signal transmission.
      4. The orientation of the antenna in your RØDELink kit during operation will also help optimise the systems performance. The Rx-CAM will be oriented correctly if mounted via the cold shoe mount which it ships with as standard. If the shoe is not being used you should aim to have the bottom of the receiver (opposite side to the screen) pointing towards the transmitter.
お問い合わせ

ついて質問やサポートの依頼をする場合は、当社の問い合わせ先をご覧になって直接お問い合わせになるか、ここからお住まいの地域の取扱店を捜してください。